|
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Front table digital display (cm or inches) with multilingual operator guidance. Digital display accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes.
Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Motor: | 2 HorsePower |
Size: | 48" D x 39" W x 51" H (61 1/2" W with side tables) |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Shipping Weight: | 775 lbs. (795 lbs. with side tables) Pounds |
![]() 3/8 inch 3:1 Wire Bindings $24.91 |
![]() Velobind System 3 Pro $4,949.00 |
![]() Onyx 4000Plus Heavy Duty $1,848.85 |
![]() 2 Year Worry Free Guarantee (e) $124.99 |
![]() 0.070” Sign Channel $29.95 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x Paper Sensor Unit/DF-755 | $49.48 |
1 x BEARING 5210-031 | $22.10 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $744.00 |
1 x Metal Loop Hangers | $59.50 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x Phoenix 2700-DHP Dual Heat Laminator — Production Model | $2,549.00 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x Digital 60 Wide Format Laminator | $18,999.00 |
1 x 32" I Bar Shrink Wrap Sealer | $449.00 |
1 x Camco Big 3 Top Side (12") Cutter Knife | $156.00 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x DRIVE BELT | $16.70 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |